The RetrieverTraining.Net Forums The Retriever Academy
Total Retriever Training with Mike Lardy
Hawkeye Media Gunners Up Tritronics Outdoor Media
Results 1 to 9 of 9

Thread: NEF and H&R Pins For Sale

  1. #1
    Junior Member
    Join Date
    Feb 2013
    Posts
    5

    Default NEF and H&R Pins For Sale

    I have had some Pins Made for the NEF and H&R blank pistol they work great. I am selling them for 16.00 each with 4.00 S&H
    I have 20 made so far and more will come.

    paypal address to send payment to is ansell@mchsi.com

    My address is
    Gary Ansell
    1023 Tulls Creek Rd
    Moyock, NC 27958
    cell if any questions please call
    7577243139
    email: ansell@mchsi.com
    thanks Gary Ansell

  2. #2
    Junior Member
    Join Date
    Feb 2013
    Posts
    5

    Default

    when he sent them back he filed them down so much he destroyed them. but all in good faith i sent him 2 new sets like we discussed. I never heard back form him. so what was that i sent him 4 sets. some times you cant help someone. so let me think about this . I send you 2 sets you destroy them and send them back I send you 2 new sets i don't hear back from you. and now you slam me? we people just consider the source, I have sold over 500 sets and only had 4 guns it did not work in. HUM!!! I am going to take my 30,000 miles tires back and get my full money back or better yet i'll just get them to give me new ones after i cut the tread off. Yea! Dude Drink another cup of Coffee.
    Last edited by pawnansell; 02-05-2013 at 06:21 PM.

  3. #3
    Senior Member huntinman's Avatar
    Join Date
    May 2009
    Location
    Tennessee
    Posts
    7,129

    Default

    I don't have a dawg in this fight. I do note, however that the OP is willing to post his real name, address, phone number and email... Mr. Gun Dawg, you have done none of that... But you have dropped a third party's name. Don't know either of you, but maybe it should be a level playing field?
    Bill Davis

  4. #4
    Senior Member 43x's Avatar
    Join Date
    Mar 2009
    Location
    WY
    Posts
    567

    Default

    I bought a set of inserts from him, worked ok in my gun

  5. #5
    Junior Member
    Join Date
    Feb 2013
    Posts
    5

    Default

    Well he has gone! HUM!!! Well any way 43X yep and saves you tons of money.
    like i said I have the pins for the Blank guns now. They are not made any more. I started making them because i had a lot of people asking me to get them made. so I did little pricey but if that what it takes I did it. So don't loose your which is easy to do. Thanks Gary Ansell

    Also i am in the process of making a 209 cylinder that fits the NEF and H&R. it will be a six shot also. it will be made out of air craft Alum . A friend has a 7 cut CNC machine and he builds gun parts. I am waiting on what the cost will be. So stay tuned.
    Gary
    Last edited by pawnansell; 02-06-2013 at 07:56 PM.

  6. #6
    Senior Member WindyCreek's Avatar
    Join Date
    Jan 2007
    Location
    Alabama
    Posts
    158

    Default

    Gary, Sent you PayPal payment for a NEF pin last Sunday, sent emails and PM to confirm you have received payment, PayPal said payment was received but so far no communication with you. Could you give me an update?

  7. #7
    Senior Member WindyCreek's Avatar
    Join Date
    Jan 2007
    Location
    Alabama
    Posts
    158

    Default

    Gary, Pin was received today and functions perfectly in my NEF pistol. Thanks, Randy

  8. #8
    Senior Member Gary Wayne Abbott I's Avatar
    Join Date
    Dec 2003
    Location
    Alaska, Washington, Louisiana
    Posts
    163

    Default

    Quote Originally Posted by pawnansell View Post
    Well he has gone! HUM!!! Well any way 43X yep and saves you tons of money.
    like i said I have the pins for the Blank guns now. They are not made any more. I started making them because i had a lot of people asking me to get them made. so I did little pricey but if that what it takes I did it. So don't loose your which is easy to do. Thanks Gary Ansell

    Also i am in the process of making a 209 cylinder that fits the NEF and H&R. it will be a six shot also. it will be made out of air craft Alum . A friend has a 7 cut CNC machine and he builds gun parts. I am waiting on what the cost will be. So stay tuned.
    Gary

    I am in need of a NEF cylinder for a .22 is there any chance of getting one through you?

    Thank you
    Feared by ducks, envied by hunters and loved by dogs.

    Nomadic Retrievers
    http://www.nomadicretrievers.net/

  9. #9
    Junior Member
    Join Date
    Feb 2013
    Posts
    5

    Default

    no the cost would be toooooo much for the amount sold

    all the cnc machines at the shop i was to use is tied up for years so i have to find another shop on the hunt again

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •