The RetrieverTraining.Net Forums The Retriever Academy
Total Retriever Training with Mike Lardy
Hawkeye Media Gunners Up Tritronics Outdoor Media
Results 1 to 6 of 6

Thread: Bumperboy electronics

  1. #1
    Junior Member
    Join Date
    Mar 2010
    Location
    GA.
    Posts
    3

    Default Bumperboy electronics

    Can bumperboy launchers be modified to work with TT or dogtra electronics?

  2. #2
    Junior Member redco97's Avatar
    Join Date
    Feb 2008
    Location
    Dallas, TX
    Posts
    12

    Default

    I am curious too?

  3. #3
    Member
    Join Date
    Jun 2011
    Location
    Vancouver Island
    Posts
    86

    Default

    They will work well on the two shooters, some minor wiring changes..not so easy on the 4shooters as the TT and Dogtra only have two buttons.

  4. #4
    Senior Member Tim West's Avatar
    Join Date
    May 2003
    Location
    Arcadia, OK
    Posts
    1,268

    Default

    Care to reveal how this is done?
    www.duckclubofoklahoma.com
    www.arcadiaretrievers.com
    Home of:

    Bayou Magic's Rouxster Bleu "Bleu" Amateur Win
    Arcadia's Senor Jefe (Ret) 10 1/2 AA pts
    Co/owner FC/AFC Wing Magic's Louisiana Roux MH (Ret)
    AFC Arcadia's Say Goodnight Gracie (RIP)
    Arcadia's He's A Cracker "Archie" (RIP)

  5. #5
    Junior Member
    Join Date
    Jan 2011
    Posts
    8

    Default

    If you know how to do this with a Derby Double or two of them please advise how to incorporate TT. Thanks

  6. #6
    Member
    Join Date
    Jun 2011
    Location
    Vancouver Island
    Posts
    86

    Default

    As i recall ( don't have the unit here ) i removed the servo and removed the three wires from the circuit board in the servo and solder the red and black directly to the motor,and removed the
    third wire,then connected the two wires to the Tritronics receiver.I may have added a small spring to return the servo arm..Hope this helps.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •