RetrieverTraining.Net - the RTF banner
1 - 11 of 11 Posts

· Registered
Joined
·
3,438 Posts
Mike Peters-labguy23 said:
I have 2 NEF .22's and they have worked great for the past year or so. But now that we have been training in the cold (10-20degress) the hammer won't lock back. Anyone else have this problem?
Needs to be cleaned Mike and a very fine oil used.
 

· Registered
Joined
·
2,421 Posts
Yes, I have exactly the same problem with a relatively new gun, same model. I would think either the cocking mechanism (probably spring-loaded) is weak or tolerances poor. But I'll try cleaning & using a finer oil also that may not be as cold-affected.
 

· Registered
Joined
·
2,421 Posts
Ken Bora said:
Granddaddy said:
For one reason, I use a grand-daughter as a birdgirl
That is cool 8) I just never use mine like that. The hammer on mine does lock back. I went out and got it from the truck, very cold. :shock:
Off topic but she has also titled a retriever, duck hunts & shot flyers for us (under her dad's close supervision) this past Sat. Out of 25 flyers they only had one runner. Her dad has shorten the stock on a 20 ga. Rem 1100 youth model & she's a pretty good shot........and she's only 9 yrs old.
 

· Registered
Joined
·
2,673 Posts
Granddaddy said:
she's a pretty good shot........and she's only 9 yrs old.
I can vouch for that. Kelsey can shoot flyers for me anytime.
Envious of her shooting ability regards,
Becky
 

· Registered
Joined
·
241 Posts
I am not speaking negatively of any particular brand, but all of them seen to be disposable when used alot.
We use the 209 primer variety.
We had the 8 shot model, which with very heavily used, lasted about a year. Alot of misfires and we were happy to lose them.
We bought 2 of the new 5 shot models, and we have had customize them to work in less than 6 months. Now--you can't cock them back and shot single action.
Just my experience
Hope you guys have better luck. :roll:
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top