RetrieverTraining.Net - the RTF banner
1 - 9 of 9 Posts

·
Registered
Joined
·
884 Posts
Discussion Starter · #1 ·
I noticed Dokken makes rubber duck bumpers to fit 22 cal hand launcher. Will these work on a bumper boy shaft as well?


Appreciate your help.
 

·
Registered
Joined
·
7,411 Posts
BB sells one that does, but I don't know if the ones for the handheld launchers work on BB's or not.
 

·
Registered
Joined
·
708 Posts
I used the Dokkens in my BB without any problems. They actually go much further than the BB models.
 

·
Registered
Joined
·
179 Posts
I've been wondering the same thing. The BB bumpers will fit a handheld launcher, so the Dokken launcher birds should fit a BB. You could drop an email to the helpful folks at Gundog Supply - they should know.

Please post when you have a definite answer.

Cheers, Jason.
 

·
Registered
Joined
·
708 Posts
I am not real sure. I would guess so. The Dokkens I used are smaller and they are also harder to see. It was something that my older dog did fine with but I would be careful with a young dog, especially if he is just starting to get marks.

I use all three color loads depending on what I am doing. I did a test with the same loads with my double to test them. I usually use the green loads.
 

·
Registered
Joined
·
884 Posts
Discussion Starter · #7 ·
I asked and here's their reply
Thanks for contacting Gun Dog Supply.

They should fit, however I know at one time there was a problem with the bumper boys being too powerful and damaging the Dokken dummies.

I would suggest you contact Bumperboy for their recommendations.

So Thunderdan, did you have any blow out problems with the dokkens?
 

·
Registered
Joined
·
708 Posts
Nope, never had any problems. For my younger dog I would add a white streamer to it......
 

·
Registered
Joined
·
884 Posts
Discussion Starter · #9 ·
thunderdan said:
Nope, never had any problems. For my younger dog I would add a white streamer to it......

Thanks for your help!

Sincerely, Purpledawg and Handsome Hoover
 
1 - 9 of 9 Posts
Top